Single Row Deep Groove Ball Bearings with Snap Ring Groove and Snap Ring

Product and drawing

Send inquiry

Product Catalog Download

Design Variants

Misalignment

Cage

Tolerance

Internal clearance

Deep groove ball bearings with stop groove or stop ring are suffixed with N or NR after the original deep groove ball bearing model.

The dimensions of stop slots and stop rings are shown in the table below.

Bearings of other dimensions are rated at the same load as single row deep groove ball bearings.

Deep groove ball bearings with stop groove or stop ring are suffixed with N or NR after the original deep groove ball bearing model.
The dimensions of stop slots and stop rings are shown in the table below.
Bearings of other dimensions are rated at the same load as single row deep groove ball bearings.
The automatic aligning capacity of single row deep groove ball bearings is very limited. Under normal service conditions, the maximum allowable deflection Angle is not more than 10 '. Misalignment will produce considerable additional stress, shorten the bearing life and produce a lot of noise.DHK single row deep groove ball bearings use stamped steel cage as the standard cage. For large bearings, brass cage is usually used as the standard cage (with suffix M).
DHK single row deep groove ball bearings use stamped steel cage as the standard cage. For large bearings, brass cage is usually used as the standard cage (with suffix M).
DHK single row deep groove ball bearings with ordinary tolerance (PN) as the standard accuracy class.
DHK can provide bearings with higher dimensional and geometric accuracy tolerance levels upon customer order.
DHK single row deep groove ball bearing adopts basic group clearance (CN) as standard clearance.
DHK can provide bearings with other clearance groups on request, or bearings with special clearance as requested by customers;
The specific values of different clearance groups are shown in the table below, and the data in the table meet the standards GB/T 4604-1991 and IS05753-1991.

DHK single row/double row deep groove ball bearings radial clearance standard

Dimensions and Parameters

Inquiry	Designation Bearing series				D	Dn		a Bearing series60		a Bearing series 62 63 64		b		r0	Stop ring	f		e		g	DR	DG
Inquiry	60	62	63	64	D	min.	max.	min.	max.	min.	max.	min.	max.	max.	D	min.	max.	min.	max.	≈	max	min
	--	6200N	--	--	30	27.92	28.17	--	--	1.91	2.06	1.35	1.65	0.4	SP30	1.02	1.12	3.1	3.25	3	34.7	35.5
	6002N	6201N	--	--	32	29.9	30.15	1.91	2.06	1.91	2.06	1.35	1.65	0.4	SP32	1.02	1.12	3.1	3.25	3	36.7	37.5
	6003N	6202N	6300N	--	35	32.92	33.17	1.91	2.06	1.91	2.06	1.35	1.65	0.4	SP35	1.02	1.12	3.1	3.25	3	39.7	40.5
	--	--	6301N	--	37	34.52	34.77	--	--	1.91	2.06	1.35	1.65	0.4	SP37	1.02	1.12	3.1	3.25	3	41.3	42
	--	6203N	--	--	40	37.85	38.1	--	--	1.91	2.06	1.35	1.65	0.4	SP40	1.02	1.12	3.1	3.25	3	44.6	45.5
	6004N	--	6302N	--	42	39.5	39.75	1.9	2.06	1.91	2.06	1.35	1.65	0.4	SP42	1.02	1.12	3.1	3.25	3	46.3	47
	60/22N	--	--	--	44	41.5	41.75	1.9	2.06	--	--	1.35	1.65	0.4	SP44	1.02	1.12	3.1	4.04	3	48.3	49
	6005N	6204N	6303N	--	47	44.35	44.6	1.9	2.06	2.31	2.46	1.35	1.65	0.4	SP47	1.02	1.12	3.89	4.04	4	52.7	53.5
	--	60/22N	--	--	50	47.35	47.6	--	--	2.31	2.46	1.35	1.65	0.4	SP50	1.02	1.12	3.89	4.04	4	55.7	56.5
	6028N	6205N	6304N	6402N	52	49.48	49.73	1.91	2.06	2.31	2.46	1.35	1.65	0.4	SP52	1.02	1.12	3.89	4.04	4	57.9	58.5
	6006N	--	--	--	55	52.35	52.6	1.91	2.06	--	--	1.35	1.65	0.4	SP55	1.02	1.12	3.89	4.04	4	60.7	61.5
	--	--	63/22N	--	56	52.35	53.6	--	--	2.31	2.46	1.35	1.65	0.4	SP56	1.02	1.12	3.89	4.04	4	61.7	62.5
	60/32N	62/28N	--	--	58	52.35	55.6	1.88	2.06	2.31	2.46	1.35	1.65	0.4	SP58	1.02	1.12	3.89	4.04	4	63.7	64.5
	6007N	6206N	6305N	6403N	62	59.11	59.61	1.86	2.06	3.08	3.28	1.9	2.2	0.6	SP62	1.6	1.7	3.89	4.04	4	67.7	68.5
	--	62/32N	--	--	65	62.1	62.6	--	--	3.08	3.28	1.9	2.2	0.6	SP65	1.6	1.7	3.89	4.04	4	70.7	71.5
	6008N	--	63/28	--	68	64.32	64.82	2.29	2.49	3.08	3.28	1.9	2.2	0.6	SP68	1.6	1.7	4.7	4.85	5	74.6	76
	--	6207N	6306N	6404N	72	68.31	68.81	--	--	3.08	3.28	1.9	2.2	0.6	SP72	1.6	1.7	4.7	4.85	5	78.6	80
	6009N	--	63/32N	--	75	71.33	71.83	2.29	2.49	3.08	3.28	1.9	2.2	0.6	SP75	1.6	1.7	4.7	4.85	5	81.6	83
	6010N	6208N	6307N	6405N	80	76.31	76.81	2.29	2.49	3.08	3.28	1.9	2.2	0.6	SP80	1.6	1.7	4.7	4.85	5	86.6	88
	--	6209N	--	--	85	81.31	81.81	--	--	3.08	3.28	1.9	2.2	0.6	SP85	1.6	1.7	4.7	4.85	5	91.6	93
	6011N	6210N	6308N	6406N	90	86.29	86.79	2.67	2.87	3.08	3.28	2.7	3	0.6	SP90	2.36	2.46	4.7	4.85	5	96.6	98
	6012N	--	--	--	95	91.32	91.82	2.67	2.87	--	--	2.7	3	0.6	SP95	2.36	2.46	4.7	4.85	5	101.6	103
	6013N	3211N	6309N	6407N	100	96.3	96.8	2.67	2.87	3.08	3.28	2.7	3	0.6	SP100	2.36	2.46	4.7	4.85	5	106.5	108
	6014N	3212N	6310N	6408N	110	106.31	106.81	2.67	2.87	3.08	3.28	2.7	3	0.6	SP110	2.36	2.46	4.7	4.85	5	116.6	118
	6015N	--	--	--	115	111.31	111.81	2.67	2.87	--	--	2.7	3	0.6	SP115	2.36	2.46	4.7	4.85	5	121.6	123
	--	6213N	6311N	6409N	120	114.71	115.21	--	--	3.86	4.06	3.1	3.4	0.6	SP120	2.72	2.82	7.06	7.21	7	129.7	131.5
	6016N	6214N	--	--	125	119.72	120.22	2.67	2.87	3.86	4.06	3.1	3.4	0.6	SP125	2.72	2.82	7.06	7.21	7	134.7	126.5
	6017N	6215N	6312N	6410N	130	124.72	125.22	2.67	2.87	3.86	4.06	3.1	3.4	0.6	SP130	2.72	2.82	7.06	7.21	7	139.7	141.5
	6018N	6216N	6313N	6411N	140	134.73	135.23	6.46	3.71	4.65	1.9	3.1	3.4	0.6	SP140	2.72	2.82	7.06	7.21	7	154.7	157
	6019N	--	--	--	145	139.73	140.23	3.44	3.71	--	--	3.1	3.4	0.6	SP145	2.72	2.82	7.06	7.21	7	154.7	157
Previous12 Next