Single Row Tapered Roller Bearings (Inch series)

Products And Drawings

Send inquiry

Product Catalog Download

Design Variants

Cage

Tolerance

Internal clearance

In the new design, please preferentially choose DHK metric tapered roller bearings.

Inch tapered roller bearings are available from DHK upon request and all bearing parameters are listed in the catalogue.

In the new design, please preferentially choose DHK metric tapered roller bearings.
Inch tapered roller bearings are available from DHK upon request and all bearing parameters are listed in the catalogue.
DHK inch tapered roller bearing adopts punch plate cage.
The clearance of a single row tapered roller bearing is set by adjusting another set of bearings used with it during installation.
The axial clearance of DHK bearing pairs face to face and back to back is shown in the table below. DHK can be customized with axial clearance as required.

Dimensions and Parameters

Inquiry	Designations	Series	Boundary dimensions（mm）									Load ratings(KN)		Fatigue load	Speed ratings[rpm]		Mass(kg)	Abutment and fillet dimensions（mm）									Calculation factors
Inquiry	Designations	Series	d	D	T	d1	B	C	r1.2 min	r3.4 min	a	Dynmic Cr	stat Cor	pu	油润滑	grease	Mass(kg)	da max	db min	Da min	Da max	Db min	Cb min	Ca min	ra max	rb max	e	Y	Y0
	K-6581X/K-6535	6500	89.974 3.5423	161.925	53.975	125	55.1	42.862	3	3.3	40	330	510	57	2000	3000	4.75	102	103	134	147.5	154	8	9.5	2.5	3	0.4	1.5	0.8
			89.974 3.5423	6.375	2.125		2.1693	1.6875	0.12	0.13
	K-47890/K-47820	47800	92.075 3.6250	146.05	33.338	120	34.925	26.195	3.5	3.3	32	165	270	30.5	2200	3200	2.1	105	105.5	128	133	139	6	7	3	3	0.44	1.35	0.8
			92.075 3.6250	5.75	1.3125		1.375	1.0313	0.14	0.13
	K-598A/K-593X	595	92.075 3.6250	150	35.992	122	36.322	27	6.4	3	37	194	305	35.5	2000	3000	2.7	104	106	128	136.5	141	4	9	6	2.5	0.44	1.35	0.8
			92.075 3.6250	5.9055	1.417		1.43	1.063	0.25	0.13
	K-598/K-592A	595	92.075 3.6250	152.4	39.688	122	36.322	30.162	3.5	3.3	37	194	305	35.5	2000	3000	2.7	104	106	128	139	141	4	9.5	3	3	0.44	1.35	0.8
			92.075 3.6250	6	1.5625		1.43	1.1875	0.14	0.13
	K-598A/K-592A	595	92.075 3.6250	152.4	39.688	122	36.322	30.162	6.4	3.3	37	194	305	35.5	2000	3000	2.65	104	111.5	128	139	141	4	9.5	6	3	0.44	1.35	0.8
			92.075 3.6250	6	1.5625		1.43	1.1875	0.25	0.13
	K-42368/K-42584	42000	93.662 3.6875	148.43	28.575	122	28.971	21.433	3	3	31	130	196	22	2200	3200	1.5	107	107.5	131	135.5	141	6	7	2.5	2.5	0.5	1.2	0.7
			93.662 3.6875	5.8437	1.125		1.1406	0.8438	0.13	0.12
	K-LL319349/K-LL319310	KK319300	95.250 3.7500	128.588	15.875	112	15.083	11.908	1.5	1.5	20	58.3	95	10.4	2400	3400	0.54	105	104.5	119	119	123	3	3.5	1	1	0.35	1.7	0.9
			95.250 3.7500	5.0625	1.625		0.5938	0.4688	0.06	0.06
	K-47896/K-47820	47800	95.250 3.7500	146.05	33.338	120	34.925	26.195	3.5	3.3	32	165	270	30.5	2200	3200	1.9	105	109	128	136.5	141	6	7	3	3	0.44	1.35	0.8
			95.250 3.7500	5.75	1.3125		1.375	1.0313	0.14	0.13
	K-594/K-592A	595	95.250 3.7500	152.4	39.688	121	36.322	30.162	3.5	3.3	37	194	305	35.5	2000	3000	2.55	104	109	128	139	141	4	9.5	3	3	0.44	1.35	0.8
			95.250 3.7500	6	1.5625		1.43	1.1875	0.14	0.13
	K-594A/K-592A	595	95.250 3.7500	152.4	39.688	121	36.322	30.162	5	3.3	37	194	305	35.5	2000	3000	2.55	104	112	128	139	141	4	9.5	4	3	0.44	1.35	0.8
			95.250 3.7500	6	1.5625		1.43	1.1875	0.2	0.13
	K-683/K-672	675	95.250 3.7500	168.275	41.275	133	41.275	30.162	3.5	3.3	38	233	365	39	1900	2800	3.8	114	109	143	154.5	157	6	11	3	3	0.48	1.25	0.7
			95.250 3.7500	6.625	1.625		1.625	1.1875	0.14	0.13
	K-42381/K-42584	42000	96.838 3.8125	148.43	28.575	122	28.971	21.433	3.5	3	31	130	196	22	2200	3200	1.65	107	110.5	131	135.5	141	6	7	3	2.5	0.5	1.2	0.7
			96.838 3.8125	5.8437	1.125		1.1406	0.8438	0.14	0.13
	K-HM220149/K-HM220110	HM220100	99.975 3.9360	156.975	42	128	42	34	8	3.5	32	246	400	43	2000	3000	2.9	111	122.5	140	143.5	151	7	8	7	3	0.33	1.8	1
			99.975 3.9360	6.1801	1.6535		1.6535	1.3386	0.31	0.14
	K-52400/K-52618	52000	101.600 4.0000	157.162	36.512	131	36.116	26.195	3.5	3.3	36	201	335	37.5	1900	2800	2.45	113	115.5	139	143.5	151	6	10	3	3	0.48	1.25	0.7
			101.600 4.0000	6.1875	1.4375		1.4219	1.0313	0.14	0.13
	K-52401/K-52618	52000	101.600 4.0000	157.162	36.512	131	36.116	26.195	8	3.3	36	201	335	37.5	1900	2800	2.45	113	124.5	139	143.5	151	6	10	7	3	0.48	1.25	0.7
			101.600 4.0000	6.1875	1.4375		1.4219	1.0313	0.31	0.13
Previous 1 2...17 181920 21...23 24 Next