Single Row Tapered Roller Bearings (Inch series)

Products And Drawings

Send inquiry

Product Catalog Download

Design Variants

Cage

Tolerance

Internal clearance

In the new design, please preferentially choose DHK metric tapered roller bearings.

Inch tapered roller bearings are available from DHK upon request and all bearing parameters are listed in the catalogue.

In the new design, please preferentially choose DHK metric tapered roller bearings.
Inch tapered roller bearings are available from DHK upon request and all bearing parameters are listed in the catalogue.
DHK inch tapered roller bearing adopts punch plate cage.
The clearance of a single row tapered roller bearing is set by adjusting another set of bearings used with it during installation.
The axial clearance of DHK bearing pairs face to face and back to back is shown in the table below. DHK can be customized with axial clearance as required.

Dimensions and Parameters

Inquiry	Designations	Series	Boundary dimensions（mm）									Load ratings(KN)		Fatigue load	Speed ratings[rpm]		Mass(kg)	Abutment and fillet dimensions（mm）									Calculation factors
Inquiry	Designations	Series	d	D	T	d1	B	C	r1.2 min	r3.4 min	a	Dynmic Cr	stat Cor	pu	油润滑	grease	Mass(kg)	da max	db min	Da min	Da max	Db min	Cb min	Ca min	ra max	rb max	e	Y	Y0
	K-HM813841/K-HM813811	HM813800	60.325 2.3750	127	36.512	99.1	36.512	26.988	3.5	1.5	32	165	236	28	2800	3800	2.2	81	73.5	106	118	120	6	9.5	3	1	0.5	1.2	0.7
			60.325 2.3750	5	1.4375		1.4375	1.0625	0.14	0.06
	K-65237/K-65500	65000	60.325 2.3750	127	44.45	92	44.45	34.925	3.5	3.3	34	209	275	31.5	3000	4000	2.6	71	73.5	99	114.5	118	5	9.5	3	3	0.48	1.25	0.7
			60.325 2.3750	5	1.75		1.75	1.375	0.14	0.13
	K-HM911245/K-HM911210	HM911200	60.325 2.3750	130.175	36.512	97.2	33.338	23.812	5	3.3	40	151	180	22.4	2600	3600	2.1	74	76.5	102	117.5	124	4	12.5	4	3	0.83	0.72	0.4
			60.325 2.3750	5.125	1.4375		1.3125	0.9375	0.2	0.13
	K-H715334/K-H715311	H715300	61.912 2.4375	136.525	46.038	110	46.038	36.512	3.5	3.3	37	220	355	3.9	2400	3400	3.45	88	75.5	113	123.5	132	7	9	3	3	0.48	1.25	0.7
			61.912 2.4375	5.375	1.8125		1.8125	1.4375	0.14	0.13
	K-H913842/K-H913810	H913800	61.912 2.4375	146.05	41.275	109	39.688	25.4	3.5	3.3	44	198	236	2.9	2200	3200	3.2	83	75.5	116	133	138	6	15.5	3	3	0.79	0.76	0.4
			61.912 2.4375	5.75	1.625		1.5625	1	0.14	0.13
	K-H913843/K-H913810	H913800	61.912 2.4375	146.05	41.275	109	39.688	25.4	7	3.3	44	198	236	2.9	2200	3200	3.2	83	82	116	133	138	6	15.5	6	3	0.79	0.76	0.4
			61.912 2.4375	5.75	1.625		1.5625	1	0.28	0.13
	K-39250/K-39412	39000	63.500 2.5000	104.775	21.433	82.6	22	15.875	2	2	19	85.8	112	12.9	3400	4500	0.67	73	73	95	95	102	4	5.5	1.5	1.5	0.4	1.5	0.8
			63.500 2.5000	4.125	0.8438		0.8661	0.625	0.08	0.08
	K-395A/K-394A	395	63.500 2.5000	110	22	86.4	21.996	18.824	3.5	2	21	88	118	13.7	3200	4300	0.84	77	76.5	98	101.5	105	4	3	3	1	0.4	1.5	0.8
			63.500 2.5000	4.3307	0.8661		0.866	0.7411	0.14	0.08
	K-29585/K-29520	29500	63.500 2.5000	107.95	25.4	88.3	25.4	19.05	3.5	3.5	24	89.7	137	15.3	3200	4300	0.9	77	76.5	95.5	101.5	102	5	6	3	3	0.46	1.3	0.7
			63.500 2.5000	4.25	1		1	0.75	0.14	0.14
	K-39585/K-39520	39500	63.500 2.5000	112.712	30.162	88.3	30.162	23.812	3.5	3.5	23	142	204	24	3200	4300	1.25	76	76.5	100	100	107	5	6	3	3	0.33	1.8	1
			63.500 2.5000	4.4375	1.1875		1.1875	0.9375	0.14	0.14
	K-3982/K-3920	3900	63.500 2.5000	112.712	30.162	87.8	30.048	23.812	3.5	3.5	25	123	183	21.2	3200	4300	1.25	75	76.5	96	100	105	4	6	3	3	0.4	1.5	0.8
			63.500 2.5000	4.4375	1.1875		1.183	0.9375	0.14	0.14
	K-559/K-552A	555	63.500 2.5000	123.825	38.1	92	36.678	30.162	3.5	3.5	27	172	240	29	3000	4000	2	78	76.5	103	111	113	4	7.5	3	3	0.35	1.7	0.9
			63.500 2.5000	4.875	1.5		1.144	1.1875	0.14	0.14
	K-6379/K-6320	6300	65.088 2.5625	135.755	53.975	97.4	56.007	44.45	3.5	3.5	34	286	400	46.5	2800	3800	3.7	78	78.5	110	123	125	7	9.5	3	3	0.33	1.8	1
			65.088 2.5625	5.3447	2.125		2.205	1.75	0.14	0.14
	K-H212749/K-H212710	H2127100	65.987 2.5979	123.975	41.5	93.9	41.5	34	7	3.5	29	224	310	36	3000	4000	2.2	77	86	107	111	118	7	7.5	6	3	0.33	1.8	1
			65.987 2.5979	4.8809	1.6339		1.6339	1.3386	0.28	0.14
	K-395A/K-394A	395	66.675 2.625	110	22	96.4	21.996	18.824	0.8	1.3	21	88	118	13.7	3200	4300	0.79	77	74	98	101.5	105	4	3	0.6	1	0.4	1.5	0.8
			66.675 2.625	4.3307	0.8661		0.866	0.7411	0.03	0.05
Previous 1 2...11 121314 15...23 24 Next